Kidde KN-COB-IC Bedienungsanleitung PDF herunterladen (Seite 14)

4. Installation Instructions

Mounting

• After selecting the proper location for your CO Alarm and wiring the

AC Quick-Connector harness, attach the mounting plate to the elec-

trical box. To ensure aesthetic alignment of the alarm with the hall-

way, or wall, the “A” line on the mounting plate must be parallel with

the hallway when ceiling mounted or horizontal when wall mounted.

• Pull the AC Quick-Connector through the center hole in the mounting

plate and secure the bracket, making sure that the mounting screws

are positioned in the small ends of the keyholes before tightening.

• Plug the AC Quick-Connector into the back of the alarm, making sure

that the locks on the connector snap into the unit. Push the excess

wire back into the electrical box through

the hole in the center of the mounting

plate.

• Install the alarm on the mounting plate

and twist the alarm in the direction of

the “ON” arrow on the cover until the

alarm ratchets into place (this ratcheting

function allows for aesthetic alignment).

Note: The alarm will mount to the

bracket in 4 positions (every 90 degrees).

• Turn on the AC power. The green AC

Power On Indicator should be lit when

the alarm is operating from AC power.

• Pull the Battery Pull Tab (yellow tab pro-

truding from unit) completely out of

unit. This will automatically connect the

battery.

AC Quick Connector

Post Locations

820-1685B_10Y_V2:_ 2012.9.14 10:25 AM Page 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Keine Kommentare

Kidde KN-COB-IC Bedienungsanleitung Seite 14