Kidde KN-COSM-IB Bedienungsanleitung PDF herunterladen (Seite 16)

7. Turn on the AC power. The green AC Power On Indicator

should be lit when the alarm is operating from AC power.

8. Two labels are included with your alarm. They have important

information on what to do in case of an alarm. Add the

phone number of your emergency service provider (Fire

Department or 911) in the space provided. Place one label

next to the alarm after it is mounted, and one label near a

fresh air source such as a door or window.

9. Remove the red cardboard from the battery compartment,

install batteries, close battery door.

Step 4

Testing the Alarm

CAUTION: Due to the loudness (85 decibels) of the

alarm, always stand an arms length away from the unit

when testing.

After installation, TEST THE UNIT’S ELECTRONICS by pressing and

releasing the test/reset button. You will then hear the following

sequence of "beeps" and verbal warnings:

Three long beeps.

Verbal warning: "FIRE!"

Three long beeps.

Four quick beeps.

Verbal warning: “WARNING! CARBON MONOXIDE”

Four quick beeps

Single beep to reset

Weekly testing is required! If at anytime it does not perform as

described, verify power is connected correctly and that the

battery doesn’t need replacing. Clean dust and other buildup off

the unit. If it still doesn’t operate properly call the Product

Support Line at 1-800-880-6788.

Interconnect Feature

Your Combination Smoke/CO Alarm is interconnectable to other

multiple station Kidde, Nighthawk and Kidde/Fyrnetics products:

• When compatible smoke alarms and heat alarms are

interconnected to your Smoke/CO Alarm, they will only

respond to a smoke related event.

Installation Instructions

2544-7201-00(KN-COSM-IBA)_V4a.qxd:_ 2013.7.1 2:44 PM Pag

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

Keine Kommentare

Kidde KN-COSM-IB Bedienungsanleitung Seite 16